39
6. To store the setting, click
Save
.
7. To end Schedule Setting, click
OK
to exit and accept the setting and
Cancel
to exit.
3.4.2 Setup Recording Schedule
To setup recording schedule based on date, time, and record modes.
Recording schedule must be set in order to record.
To Set the Recording Schedule:
1. Click
>
Schedule
>
Record
tab.
2. Select the camera or mark
Select All
to select all cameras.
3. Select the record mode. Click to make a selection.
-
Always Record
Record the video from the selected camera and save it to the designated storage path.
-
Motion Record
Start recording the video from the selected camera only when the system detects movement.
Once a motion is detected, the system automatically saves the previous frames and stop
based on the
Pre Record Time
and
After Record Time
settings.
-
Sensor Record
Start recording the video from the selected camera only when the sensor has been triggered.
Once a sensor is triggered, the system automatically saves the previous frames and stop
based on the
Pre Record Time
and
After Record Time
settings.
-
Smart Record
Automatically switch to recorded at the maximum frame rate setting once a motion is
detected and if there is no motion, it records at the minimum frame rate setting. Set the
maximum frame rate setting in Chapter 3.3 Recording Setup.
-
None
The system
won’t do any recording.
4. After select the record mode, click the specific schedule block or click
All
to select all. To
un-select the specific schedule blocks, select
None
and click blocks to un-select. Click
Clear
will
Comments to this Manuals