Aver SEB3104H User Manual download pdf (Page 49)

4. Select

Trigger Any

to activate if it falls to one of the conditions or

Trigger All

to activate if it falls

to all conditions.

5. Set condition of

Camera

Motion:

click on the camera number (01 to 04) to set the condition for the system to alarm.

- In

Video Loss

, click the camera number (01 to 04) to set the alarm condition when video is

lost.

6. Set condition of

Sensor

. Click on the sensor number to set the condition for the system to alarm.

If the sensor normal status is high, set the sensor condition to low.

7. Set condition of

Alarm reset

. Click the camera number to set the reset condition of alarm. Once

alarm is reset, all alarm action will stop at the moment.

8. Click

to setup actions of alarm.

- Enlarge Camera View

Switch to only display video in preview mode from where the alarm is activated.

a. Select the camera from drop down list to specify which camera video to be enlarged on

screen when the alarm is triggered.

 Alarm Camera: when a channel has an alarm occurred, and then, the channel video

that has an alarm occurred will be enlarged on screen.

 Camera # (1~4): the selected channel video that will be enlarged on screen when an

alarm is activated.

b. Retrieve time: set the waiting duration before system switching back to original Preview

mode. If the retrieve time is un-mark, the alarm video will keep enlarging until user switch

back to Preview mode manually.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 100 101

No comments

Aver SEB3104H User Manual Page 49