Aver SEB3104H User Manual download pdf (Page 72)

100

101

6.1.1.4 Alarm Setup

(1)

(2)

(3)

(4)

(5)

(6)

1. Select the alarm from

(6)

alarm list table.

2. In

(1)

user can change alarm

Name

and

Description

3. In

(2)

Enable Time

the number from 00 to 23 represent the time in 24-hour clock. Click the time

that user want to activate or deactivate the alarm function.

4. Select the

(3) Condition

- Select

Trigger Any

to activate if it falls to one of the conditions or

Trigger All

to activate if it

falls to all conditions.

- Set condition of

Camera



Motion Detected:

click on the camera number (01 to 04) to set the condition for the

system to alarm.

 In

Video Loss

, click the camera number (01 to 04) to set the alarm condition when video

is lost.

 Set condition of

Sensor

. Click on the sensor number to set the condition for the system

to alarm. If the sensor normal status is high, set the sensor condition to low.

5. Set condition of

(4) Reset Alarm

. Click the camera number to set the reset condition of alarm.

Once alarm is reset, all alarm action will stop at the moment.

6. Setup

(5)

actions of alarm.

- Enlarge Camera View

Switch to only display video in Preview/Advanced mode from where the alarm is activated.

a. Select the camera from drop down list to specify which camera video to be enlarged on

screen when the alarm is triggered.

 Alarm Camera: when a channel has an alarm occurred, and then, the channel video

that has an alarm occurred will be enlarged on screen.

 Camera # (1~04): the selected channel video that will be enlarged on screen when an

alarm is activated.

b. Retrieve time: set the waiting duration before system switching back to original Preview

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 100 101

Comments to this Manuals

No comments

Aver SEB3104H User Manual Page 72

Comments to this Manuals

Related products and manuals for Video surveillance systems Aver SEB3104H