AVer IP Camera User Manual download pdf (Page 42)

3.3.9 Snapshot Setup

Set the camera to take snapshots when motion is detected. Snapshots image can be sent to an e-mail

address and an FTP server. Click Save to save the settings.

The resolution of the snapshot image is based on Profile 3 that user has setup in Video and Audio

section.

 Enable Snapshot: Mark to enable the snapshot function.

- Scheduling: Select the condition to trigger the snapshot.

¾ Event Based: The condition to trigger the snapshot is based on the selected event.

9 Motion detection: The camera to take a snapshot when the motion is detected.

If the camera is set to SXGA mode in Audio and Video, motion detection snapshots is

disabled.

¾ Continuous (FTP only): The snapshot image will be taken continuing. The snapshot image is

taken under Continuous condition only can send to FTP server, not by e-mail.

¾ Scheduled (FTP only): The snapshot image will can be taken during the selected day and time

period. Mark the Day (Sun~Mon) and select the start and end time. The snapshot image is taken

under Scheduled condition only can send to FTP server, not by e-mail.

 Send to: Setting the e-mail address to send the snapshot image. Click Test to check if the e-mail setting

is workable.

- E-mail Address: Enable to send the snapshot image to the specific e-mail address.

¾ User Name: Enter the username or login name for your e-mail account.

¾ Password: Enter the password for your e-mail account.

¾ SMTP Mail Server: Enter the SMTP server of your e-mail account.

¾ Sender E-mail Address: Enter the sender’s e-mail address.

¾ Recipient E-mail Address: Enter the e-mail address that user wants to send the snapshot image

to.

 FTP Server: Enable to send the snapshots image to the specified FTP server. If you do not know what

information to enter, contact the administrator of the FTP server for details. Click Test to check if the FTP

setting is correct.

¾ User Name: Enter the user name of your FTP account.

¾ Password: Enter the password of your FTP account.

¾ Host Name: Enter the host name of your FTP account.

¾ Path: Enter the storage path on the FTP server that user wants to save the snapshots image.

¾ Prefix Filename: Enter the text word that user wants to attach to the snapshot image file name.

¾ Port: Enter the port used by the FTP server.

¾ Interval: Set a time gap for sending snapshot image to the FTP server. For example: The interval

time is 10 second, and then every 10 seconds will send a snapshot image to the FTP server.

¾ Passive Mode: If the FTP server requires using the passive mode, mark the check box to enable it.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 67 68

No comments

AVer IP Camera User Manual Page 42