AVer IP Camera User Manual download pdf (Page 30)

3.3.2 Network Settings

Click the Network Setup to configure IP settings, PPPoE, DDNS and HTTP or RTSP port. Click Save to save

the settings and click Cancel to exit without save.

3.3.2.1 NETWORK SETTINGS

The IP address of the camera can be assigned by local DHCP server automatically or assign a static IP

address as needed for the private network.

 DHCP Connection: Assign the IP address by local DHCP server to the camera.

 Static IP Address: Assigns a constant IP address to the camera. Fill in IP Address, Subnet Mask, and

Default Gateway, Primary DNS, and Secondary DNS.

 Enable UPnP: To allow Windows base PCs to find this camera under Network Neighborhood without

configuration.

 Enable UPnP port forwarding: To allow the camera to add a port forwarding entry into network router

automatically when checked, if network router supports UPnP port forwarding.

 External HTTP port: Set a HTTP port for UPnP port forwarding.

 External RTSP port: Set a RTSP port for UPnP port forwarding.

Port forwarding/mapping must be enabled on Network router/gateway for remote viewing of camera

video via the internet. Please refer to the user’s manual of router to enable port forwarding/mapping

function.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 67 68

No comments

AVer IP Camera User Manual Page 30