Aver SF1031W User Manual download pdf (Page 61)

7. Click

to save the recording schedule settings.

8. To delete the schedule, select the schedule and click

Delete

9. After setup the recording schedule, user should see all setup schedules in

Select template

windows.

10. User must select the schedule in order to activate the schedule. Click the

Add

to add the select schedule.

11. In Camera setup windows, click

Apply

to complete the schedule record setting. If user wants to use the

selected schedule to all cameras, click

Apply to all cameras

C. Setup a motion detection area

1. Click Configure motion detection area to set an area for motion detected.

2. Mark Activate MD to enable the motion detection.

3. To adjust Sensitivity, enter the value( 1 ~ 100%). The higher the value, the finer the sensitivity is detected.

4. Select Drawing area and drag to select the area of motion detection. The selected area will appear a red

box. To clear the selected area, select Erase area and drag on the selected area to clear. To clear all

selected motion detected area, click Clear button. Click Save setting to complete the setup.

5. Click Exit to back to Motion detection interface.

6. In Camera setup windows, click Apply to complete the schedule record setting. If user wants to use the

selected schedule to all cameras, click Apply to all cameras.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 67 68

No comments

Aver SF1031W User Manual Page 61