Aver SF1031W User Manual Page 40
- Page / 68
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
32
3.3.8 Recording Setup
To setup recording related parameters.
Enable recording: Enable the recording function. After enabling recording, user needs to select a
location to save the recorded data, setup record mode and record schedule.
i
If the recording is not enabled, the recording button that is located on Live Video Viewer UI will not
functional.
- Record to:
¾ Samba network drive: Saving the record data on your network storage server.
¾ Samba Auth: Select Anonymous if user name or password is not required for accessing the
Samba drive. If user name and password is required, select the Account and fill in the User name,
Password, and Password confirm.
¾ Server: Enter the name of the server the Samba drive.
¾ Shared Folder: Enter the path of the shared folder.
- Recording Options
¾ Resolution: Select the resolution of the recording video. Those resolutions are set in Video and
Audio section.
¾ Record until: Setup a minimum buffer space of hard disk capacity. It is suggested set at least
32MB for buffer space.
¾ When storage is full: When the storage capacity is full or has reached the space limit that is
specified in Record until, user can choose to Stop recording or select Overwrite older
recordings to delete old recordings.
Recording Method
- Event Based: Enable to record video when motion detected event happen.
¾ Motion detection triggered recording: Enable to record video when motion is detected.
¾ Prerecord: Setup how many seconds of video before the event happen will be recorded.
¾ Postrecord: Setup how many seconds of video after the event happen will be recorded. For
example: Set the Prerecord to 5 seconds and Postrecord to 9 seconds, the camera will save
video from 5 seconds before motion was detected to 9 seconds after motion was detected.
- Continuous: Enable the camera to record continuously.
- Scheduled: Enable the camera to automatically record video during the specified times. Enable the
day (Sun ~ Mon) and select the start time and end time.
- AVerMedia 1
- AVerDiGi 1
- CONTENTS 3
- About This User Manual 7
- Before You Start 7
- Chapter 1 Introduction 9
- 1.2 Package Contents 10
- 1.3 System Requirements 11
- 1.4 Default Settings 11
- 1.5 LED Indicators 12
- 1.6 Rear Panel 12
- 1.6.2 SF1301 13
- 2.2 Connect Ethernet Cable 15
- 2.4 Reset Camera 16
- 3.3 IP Camera Setup 26
- STEP6: SETUP COMPLETE 29
- 3.3.2 Network Settings 30
- 3.3.2.2 DYNAMIC DNS SETTING 31
- 3.3.3 Wireless Setup 33
- 3.3.4 Image Setup 34
- 3.3.6 Motion Detection 38
- 3.3.7 Time and Date 39
- 3.3.8 Recording Setup 40
- 3.3.9 Snapshot Setup 42
- 3.4 System Configuration 44
- 3.4.1 Device Management 45
- 3.4.3 Firmware Upgrade 47
- 3.4.4 Device Information 48
- 3.4.5 Camera Log 48
- Chapter 4 IPCamCenter 49
- 4.2 Using the IPCamCenter 51
- 4.3 System Configuration 55
- 4.3.1 Camera Management 56
- 4.3.2 Camera Setting 57
- 4.3.3 Recording Option 64
- 4.3.4 Other Options 64
- Specifications 67
- Wireless 68
Related products and manuals for Video surveillance systems Aver SF1031W
(76 pages)Lenoxx-electronics DVD Spieler Benutzerhandbücher
Die Liste der Lenoxx-electronics DVD Spieler -Produkte enthält 0 Benutzerhandbücher für 0 diese Modelle. Alle PDF-Benutzerhandbücher können heruntergeladen oder online angezeigt werden.
Comments to this Manuals