Aver FX3000R User Manual

AVer IP Camera User Manual

6 System > General > Date & Time In the Date & Time tab, admin can manually set the date and time setting or synchronize it with the Int

7 ENGLISH Name Function (4) Setting Method Select the date & time setting method. Sync with current PC: obtain the date and time setting o

8 System > User Management In User Management, only admin level is authorized to create, delete, and edit account to connect to the IP camera

9 ENGLISH 3. Enter the same password in Password and Confirm Password column. Then click Add. To Delete or Edit a User Account Select the user acc

10 System > User Management > Connection In Connection page, admin can set the total number of user for accessing the IP camera, and filtering t

11 ENGLISH System > Network In this section, only admin level is authorized to configure the Network settings. System > Network > Setting I

12 Name Function (3) Network Type Select the type of IP camera network connection. DHCP: select this option to automatically obtain an IP addr

13 ENGLISH System > Network > Server In Server page, you can configure the Email, FTP, and NAS setting. It is necessary to configure the serve

14 System > Network > DDNS In DDNS page, you can configure the dynamic domain name service setting. DDNS is a service that provides fixed host

15 ENGLISH System > Network > QoS In QoS page, you can configure the Quality of Service setting. Enabling the QoS allows you to set the parame

Table of Contents USING THE IP CAMERA BROWSER INTERFACE ... 1 LIVE VIEW ...

16 System > Network > Others In Others page, you can enable/disable the UPnP setting. If your router does not support UPnP function, you can ena

17 ENGLISH  SNMPv3: For data security reason, the authentication and encryption assurances are added when developing SNMPv3. The user has to give

18 System > Security Only admin levels can adjust the Image setting. There are 2 function tabs: IP Filter, 802.1x, RSTP Auth... System > Securit

19 ENGLISH Single – add an IP address Network – assign a network address and the corresponding subnet mask to be filtered. Range – assign a rang

20 System > Security > 802.1X IEEE 802.1X is an IEEE Standard for port-based Network Access Control. It provides an authentication mecha

21 ENGLISH System > Security > RTSP Auth. Enable/disable RTST authentication.

22 System > Image Both admin and operator levels can adjust the Image setting. There are 5 function tabs: OSD, Preference, Exposur

23 ENGLISH System > Image > Preference In Preference page, you can tune the IP camera white balance, select display color or black & white

24 System > Image > Exposure In Exposure page, you can set the exposure zone, exposure mode, and calibrate the DC Iris. After completing the set

25 ENGLISH System > Image > Advanced In Advanced page, you can configure the Wide Dynamic Range, Denoise, IR-Cut Filter, B/W image at night an

SYSTEM > IMAGE > PREFERENCE ... 23 SYSTEM > IMAGE > E

26 Name Function (3) IR-cut Filter The IR cut filter is a mechanism that prevents the infrared light from hitting the sensor. During day time the

27 ENGLISH System > Image > Privacy Mask In Privacy Mask page, you can enable 3 privacy masks. Simply adjust the size and position the mask on

28 System > Video Stream Both admin and operator levels can configure the Video Stream. After configuring the video stream setting, click Save t

29 ENGLISH Name Function (3) Stream Select the streaming source. (4) Region of Interest Select the cropping size of video. (5) Output Resolut

30 Smart Stream Name Function (1) Stream Select the streaming source. This option is only applied to H.264. (2) Quality High: video quality of s

31 ENGLISH System > Audio Both admin and operator levels can configure the IP camera audio setting. After configuring the Audio setting, click Sa

32 System > SD/microSD Card > Management Both admin and operator levels can manage the SD/microSD Card local storage. After managing the SD/micr

33 ENGLISH System > SD/microSD Card > File Search Use this to search the captured image in the SD/microSD card.

34 Application > Motion Detection Both admin and operator levels can specify up to 3 areas on the screen to monitor the motion. In the motion d

35 ENGLISH Application > IVA If IVA function has been disabled, the all corresponded functions are disabled. To enable IVA function, must meet th

36 Application > IVA > Cross Detection Cross detection function detects moving objects that cross the virtual lines that user has set up in IP c

37 ENGLISH Application > IVA > Tampering Alarm triggers when the following situation has occurred.  Spray-painting: Alarm is triggered when

38 Application > IVA > Missing Object Select a certain object on the screen for the camera system to detect; System gives alarm when the object

39 ENGLISH Application > IVA > Suspicious Object Suspicious Object is an unusual object appears on the screen. 1. Click Application > IVA,

40 Application > ePTZ Both admin and operator levels can customize the ePTZ setting. In this section, you can set the patrol target area, patrol se

41 ENGLISH 4. Select the preset target area in the list and press to create the patrol sequence. The selected present target area will be listed

42 Event Setting Both admin and operator levels can configure the Event setting. In this section, the IP camera can be configured to perform an action

43 ENGLISH 6. Enable the type of event for the IP camera to trigger. - Alarm Interval This triggers the IP camera based on the time that use has s

44 - Suspicious Object This triggers the IP camera when a suspicious object is occurred. The suspicious object alarm selection will display only when

45 ENGLISH Status Information Show the information about the device and network setting.

1 ENGLISH Using the IP Camera Browser Interface The admin have the full access to the IP camera browser interface. The menu on the left, you can exp

46 Using MFZ Function The IP camera has motorized lens can perform MFZ function(motorized focus and zoom).  MFZ supported model list Camera Type Mo

47 ENGLISH 2. A MFZ window will show up on screen. 3. User can click the object or point on screen to foucs or use the function buttons on MFZ w

48 Name Function (4) Zoom in To zoom in for focus adjusting (5) Zoom out To zoom out for focus adjusting. (6) Focus far side To adjust the far

49 ENGLISH Using Quick Focus The Quick Focus function can help user to adjust foucs of IP camera more easy and quick. There are 2 ways to use Quick

50 75/100 : first number value will change when adjust the focus and will reach 100 when focus is done. The second number is best focust value and al

51 ENGLISH Using RTSP and ONVIF Protocol to Access the IP Camera When use the RTSP and ONVIF protocol to access the IP camera, please refer to the b

52 COPYRIGHT © 2014 AVer Information Inc. All rights reserved. All rights of this object belong to AVer Information Inc. Reproduced or transmitted

2 Name Function (3) Video screen Change the video screen display. Display the actual video pixel size. Display the video screen in compact si

3 ENGLISH Name Function (13) Record Start/stop audio and video recording. The recorded video will be saved in *.mp4 format. (14) 2-way talk

4 System > General In this section, only admin level is authorized to configure the IP camera general settings. There are 3 tabs in General setting

5 ENGLISH Name Function (6) Import Settings Restore or replace the current settings with the backup file. (7) Firmware Upgrade Upgrade the