Central Management System For E5016 User’s Manual V1.1.0.0
5 5. If user selected the Advanced mode, click the View button. 6. In Display Manager, right click on the second Display on the right side and sel
6 1.2.2 Graphic card with NVIDIA chipset 1. Click the NVIDIA nView, and select the Dualview mode. 2. Adjust each monitor resolution to 1280 x 800
7 Chapter 2 Software Installation This chapter describes how to install the CM3000 software. - Before installing the software, make sure the Wind
8 2.2 Installing the CM3000 Software in Windows XP/Vista/7 DO NOT install CMS application, DVR application, and MXR Client Software at the same co
9 Chapter 3 Using the CMS 3.1 Running the CMS Software To run the application, double-click on your PC desktop or click Start > CMS > CM
10 3.2 Using the CMS Application The CMS system allows user to monitor the remote DVR and playback the recorded video from remote DV
11 Name Function (2) E-map (F3) Switch to display the map and show the location of the DVR server on the map. If you are using a single monitor, pr
12 3.3 Using the Monitor When user has setup the monitor set in Camera Setup (see also Chapter 4.3), then click Monitor to view all selected camera
13 3.3.1 Using the Monitor Controller User can use Monitor Controller to switch different monitor set for monitoring and add/delete the channel in
14 8. Click Apply to refresh the monitor set. 9. Click arrow button to close the sub window.
COPYRIGHT © 2013 AVer Information Inc. All rights reserved. All rights of this object belong to AVer Information Inc. Reproduced or transmitted in
15 Chapter 4 Customizing the CMS System In the CMS application, click the button to customize the CMS system. In the Authorization dialog box, e
16 4.1 System Setting In the System Setting dialog box, click OK to accept and start to reload the new setting, and Cancel to exit without saving.
17 Display position: CMS system supports up to 4 monitors, users are allowed to customize the display position that to decide the Center, Emap, Mo
18 (5) Monitor Text Setting Enable/disable the camera information display and display position on the monitor screen. To configure font, click .
19 4.2 DVR Setup Display the list of all DVR servers. User may add up to 1000 DVR servers, delete and modify the DVR setting. i To upgrade the CMS
20 4.3 Camera Setup Select the camera from different DVR servers in order to monitor on same screen. The selected cameras will be played on Monitor
21 9. After the Monitor set has been created, select the DVR server. And then the cameras of the DVR server will display on the Camera Select windo
22 14. Also, user can select the Video Quality – High, Medium, Low, or Auto. Mark the Enable live displayer for most optimization can improve the li
23 In the Monitor screen, user can right-click and drag the camera to the hotspot channel for enlarge viewing. Sequence: Set the s
24 Image: To insert an image on selected channel. The image supports *.bmp and *.jpg format. Click Setup and browse where the image located is.
Manual Conventions The following conventions are used throughout this manual. The caution symbol is intended to alert the user of the importance o
25 4.4 Schedule Setup Schedule to record or backup of all the cameras either weekly or one time. 1. Select the Monitor set for scheduling. i The
26 4.4.1 To set schedule at a specific portion of time in that hour: 1. Right click the colored blocks. 2. In the Select time dialog box, click
27 4.5 Backup Setup In the Backup Setting dialog box, the number from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 16 repres
28 6. Enable Include player when backup that will included a Qplayer program for playback backup file in backup folder when backup. Only administrat
29 4.6 E-MAP Setup Holds up to 64 maps in *.bmp/*.jpg format. The map is hierarchy in structure and users can add a map on another map. User also ma
30 4.6.1.1 Add a New Map 1. Click button 2. In the Authorization dialog box, enter the administrator User ID and Password 3. Click E-Map button
31 4.6.1.2 Add a DVR Server 1. Click button 2. In the Authorization dialog box, enter the administrator User ID and Password 3. Click E-Map but
32 4.6.2 To Use the E-Map When the alarm has been activated, the DVR icon blinks and turns red. 1. On the CMS main application, click E-map or pre
33 4. To setup the E-Map, click button or right click the mouse button and select EMap setup and the E-Map interface will switch to the E-Map setu
34 4.7 User Setting CMS supports 256 user account that includes operator and administrator account. 1. Select the Authorization Level – Operator or
TABLE OF CONTENTS CHAPTER 1 INTRODUCTION ... 1 1.1 Upgrading to CMS
35 Chapter 5 Using the Playback Function User can choose to playback video stored on the local hard disk or download the video from the remote side
36 5.2 Using the Local Playback Application Name Function (1) Split Screen Mode Select from six (6) different split screen types to playback the re
37 Name Function (6) Archive Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. – Also, u
38 Name Function (13) Visual Search Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second (See also Chapter 5.5). (14) Find Next
39 5.3 To Cut and Save the Wanted Portion of the Recorded Video 1. Use the Playback Control buttons or drag the bar on the playback progress bar a
40 5.5 To Search Using the Visual Search 1. Click Visual Search. 2. In the Visual Search Setting dialog box, select the Camera number and the dat
41 5.6 To Search Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search text (r
42 5.7 To Search Using the Intelligent Search 1. Click on the video screen on where you want to search. 2. Click Intelligent Search. The Intellige
5.5 To Search Using the Visual Search ... 40 5.6 To Search Using the Event S
1 Chapter 1 Introduction The AVerTM CM3000 is a central monitoring system that enables user to monitor up to 1000 DVR servers (see also
2 1.1 Upgrading to CMS GOLD Version The CMS can be upgraded by installing a USB software License (USB Dongle). After installed the USB dongle, CMS
3 1.2 Dual Monitors setting Video configuration is different for each different VGA chipsets. Please follow the steps below to setup the dual monit
4 3. If user selected Basic mode, press the Quick Settings tab. Then select the Select a different desktop mode and click Go. 4. Select the Exten
Comments to this Manuals