22
IX. Using the PTZ Function
1. Run the AVer Viewer.
2. In main screen, select the DVR/NVR.
3. Then, select the DVR/NVR server in NVR List and connect to the DVR/NVR server.
4. In Live mode, select the PTZ camera channel and click > or button to
switch to PTZ operation mode. To close PTZ function mode, click button again.
[Note] PTZ operation mode supports in horizontal screen display, too.
The following table describes the function buttons in the PTZ mode.
Click direction button to move lens of PTZ camera. The directions are
depends on the PTZ camera has supported.
Zoom in and out the image.
Adjust the focus manually to produce clear image.
Move the PTZ camera to the preset point. Select the preset point position
and select GO button. To leave the preset point position selection, select
Exit.
Adjust the moving speed of PTZ camera.
Comments to this Manuals